HOME > SOLUTIONS > Stone Production line

Stone Production line

The stone production line produced by our factory has high automation, large crushing ratio, high production efficiency and large processing capacity. The crushed products are cubic, with low needle-like content, no internal cracks and high compressive strength. Equipment maintenance is simple, wearable parts color with the latest domestic high-strength wear-resistant materials, low wear and tear, long service life, can bring considerable economic benefits for customers.
The production line of stone crushing has been successfully applied to the crushing of limestone, basalt, granite, cobble and other rocks. The quality of the finished products after crushing fully meets the GB14685-2001 standard. It provides qualified aggregate for the industries of highway, railway, water conservancy, concrete mixing station and so on.
Stone production line (sand production line) special equipment is the production of building sand and stone special equipment, stone equipment, including E-crusher, stone crusher, impact crusher, vibration feeder, vibration screen, sand washer, belt conveyor and so on. Our company's equipment has the characteristics of reliable performance, reasonable design, convenient operation and high efficiency.
The process of stone production line is roughly as follows: (silo) - - feeder - - - Hubei crusher - - - Impact Crusher - - - vibration screen - - - (can be finished). The machines in the middle can be connected by conveyors.
Introduction of Basic Process of Stone Production Line
First, the stone is evenly fed into the crusher by the feeder for preliminary crushing. Then, the crude material produced is conveyed by belt conveyor to the impact crusher for further crushing. The fine crushed stone is fed into the vibrating screen to screen out different specifications of the stone, and the stone that does not meet the particle size requirements is fed back into the impact crusher for re-crushing.
Introduction to the Performance of Stone Production Line
 The stone production line has high automation, adjustable discharging size, high crushing rate, energy saving, large output, uniform grain size and good grain shape, which is suitable for various large and medium-sized engineering projects such as highway and bridge construction.
 The equipment configuration of the stone production line is mainly determined by the specifications of the stone and the output of the stone and the use of the stone. We provide comprehensive services before, during and after the sale. We configure the process according to the production site of the customer and strive to achieve the most reasonable and economical production line for the customer.
 The stone crushing and screening combined equipment designed and manufactured by our factory in the process design, owing to the reasonable matching of crushing equipment at all levels and the rigorous intersection of space layout, it has the characteristics of small area, high investment and economic benefits, good quality of crushed stone, low output rate of stone powder, etc., and is equipped with advanced electronic control at the same time. Operating system ensures smooth discharge, reliable operation, convenient operation, high efficiency and energy saving of the whole process.
Main equipment of stone production line:

Serial number
Maximum feed(mm) Processing capacity(t/h) Main Equipment Type, Specification and Quantity
Feeding equipment Coarse crushing equipment Fine crushing equipment Grading sieving equipment Belt conveyor(m) Installed power(kw)
1 340 30 GZD2511(3kw) PE400×600(30kw) PF1007(45kw) 3YZ1236 (15kw) 60-90(20kw) 120
2 340 50 GZD3117(10kw) PE400×600(30kw) PF1007(45kw) 3YZ1545(22kw) 100-130(30kw) 140
3 420 80 GZD3617(10kw) PE500×750(55kw) PF1010(75kw) 3YZ1548(22kw) 130-160(30kw) 200
4 480 100 GZD4321(13kw) PE600×900(75kw) PF1210(130kw) 3YZ1548(22kw) 140-180(40kw) 280
5 560 150 GZD4321(13kw) PE750×1060(90kw) PF1210(130kw) 3YZ1845(22kw) 200-240(50kw) 300
6 630 200 GZD4321(13kw) PE900×1060(110kw) PFB1212(140kw) 3YZ2050(30kw) 200(40kw) 350
7 630 250 GZD5027(17kw) PE900×1060(110kw) PFB1214(180kw) 3YZ2050(30kw) 200(40kw) 400
8 630 300 GZD5027(17kw) PE900×1200(110kw) PFB1214(180kw) 3YZ2160(30kw) 250(50kw) 450
9 700 350 GZD5027(17kw) PE1000×1200(132kw) PFB1315(250kw) 3YZ2160(30kw) 250(50kw) 500
10 700 450 GZD6223(28kw) PE1000×1200(132kw) PFB1214/2(300kw) 3YZ2145/2 (60kw) 350(60kw) 600

Counterattack crusher
Counterattack crusher

The impact crusher can handle materials with side length less than 100-500 mm, and its maximum pressure can reach 350 MPa. It has the advantages of large crushing ratio and cubic particles after crushing.
Vibrating feeder
Vibrating feeder
Vibration feeder is also called vibration feeder. In the production process of vibrating feeder, the bulk and granular materials can be uniformly, regularly and continuously fed to the receiving device from the storage bin. In the sand and stone production line, the material can be continuously and uniformly fed to the crushing machine, and roughly screened. It is widely used in metallurgy, coal mine, mineral processing, building materials, chemical industry, abrasive and so on. In the industry's crushing and screening combined equipment.
Jaw Crusher
Jaw Crusher
It can be divided into E-type crusher and E-type fine crusher. It is the first process of mineral processing. It can crush raw materials of different sizes into small pieces with uniform granules for the next process. It can also be used to produce roadbed stone and stone seed aggregate for construction.
Circular vibrating screen
Circular vibrating screen
The circular vibrating screen is an efficient vibrating screen manufactured with German technology. It is suitable for screening sand and gravel in quarries. It can also be used for classifying products in coal preparation, mineral processing, building materials, power and chemical industries.
Belt Conveyer
Belt Conveyer
Belt conveyor has the advantages of large conveying capacity, simple structure, convenient maintenance and standardization of components. It is widely used in mining, metallurgy, coal and other industries to convey loose materials or finished goods. According to the requirements of conveying technology, it can be conveyed by one conveyor or by multiple conveyors or by other conveying equipment. The conveying system is designed to meet the needs of different types of operation lines.

PREV:Mineral Processing Line

NEXT:Ball Mill

Copyright: China Zhongbo Heavy Machinery Co.,Ltd.All rights reserved

在线聊天
live chat